Tile adhesive Description
Scope: various sizes can be pasted tiles, thin tiles, marble, granite and concrete base on the interior or exterior wall.
characteristic:
1, the product is a new type of polymer-modified tile adhesives.
2, the construction without prior tiles soaked, thin-layer construction, easy to use, time-saving shortcuts.
3, has a good water resistance and anti-aging properties.
4, environmental protection, non-toxic, good for the environment.
5, waterproof performance with a certain degree of permeability.
Construction Technology:
1, porcelain and plastic water powder and water in accordance with 4: 1 ratio, stir into a paste, and then allowed to stand for 5 minutes, stirring once again.
2, with a toothed blade coating scraping the glue evenly on the work surface, then gently press on the tile coating and parallel adjustment.
3, if requested pasted bottom surface lines or deeper stone tiles, in addition to the work surface should be at the back of the base tile or stone tile glue applicator avoid hollowing.
Precautions:
1, the construction should be recognized before the base surface smooth, solid, clean, free of loose.
2, after the tile adhesive applied to the base surface, and adjust the tiles must be affixed well within 10 minutes.
3, should not have been dry the tile adhesive and then add water and stir.
4, the product should be used under the environment of 5 ℃ ~ 40 ℃.
5, the construction of approximately 1 to 2 hours with a damp cloth to clean the tile surface.
6, before the subsequent construction of the construction is completed 24 hours.
Implementation standard: JC/T547-2017 "Ceramic Tile Adhesive" standard.
Storage: Store in a cool dry place, unopened product can be stored for 18 months. |
