Base treatment:

1, ensure that tiles around and gap of clean, dry, no dust, MingShui, etc.

To hole seam between 2, ceramic tile aperture, excess cement to stamp out, avoid causing cracking caulking agent

3, the new stick tile should be completed 72 hours rear can caulking.

Reference usage:

Caulking agent 0.02 0.2 kg/m², each about 20 ~ 100 square meters.

Formula:

Caulking agent formula: kg/m²= [(brick length + width)/(brick by brick width)] * brick thick seam x width x 1.7 on average

This formula is caulking caulking agent dosage, not including loss.

Scope of application:

Suitable for indoor and outdoor walls and floor Mosaic, ceramic tile and stone gap filling. (e.g., interior and exterior wall, floor, kitchen, toilet, sink, tunnel, the basement, etc.)

Method of use:

1, add water into the clean container, add the tile gap filling agent, stir well to identify group's uniform paste, let stand for 3-5 min, stir again can.

2, water scale: caulking agent powder/water = 4:1

3, will mix good ceramic tile seam filling agent diagonal direction along the stone extrusion to the aperture of the reserved, shall not be left blank, with the gap of the bevel action remove redundant slurry, careful to avoid will be embedded into the gap size.

4, after waiting for 10 to 15 minutes or surface dry, use a sponge, a slightly damp cloth or towel wipe the surface as a circle action, further on the ceramic tile is filled seam an agent, so that gap filling agent compact and smooth surface.

5, reoccupy after ceramic tile gap filling agent dry sponge sponge or clean cloth to wipe the brick surface, remove residual gap filling agent.

6, when more than 24 hours after the joint sealant after dry solid, class stains on the surface of the ceramic tile can or ceramic tile cleaner clean with water.

Products overview:

Color caulking agent is a kind of high quality and environmentally friendly polymer cement base composite binding material. USES the high quality cement, quartz sand as aggregate, selects the polymer powder with a variety of additives. Mainly used in wall tile, marble, granite brick material such as caulking.

Product features:

1, good hydrophobic property, facing to avoid dust pollution, to overcome the phenomenon such as \"hang the pulp tears\".

2, good anti-seepage performance, improve the overall decorative surface waterproof effect.

3 flexible, rich color matching and color preserving persistence to act the role of the adornment effect more perfect.

4, mouldproof function, make facing health and clean.

5, green environmental protection, non-toxic harmless.

Note:

1, do not use acidic cleaner clean caulking veneer.

2, is suitable for use in 5 ~ 40 ℃ environment, not in the rain under the construction, construction completion within 12 hours to avoid the rains washed out.

3, avoid by all means will have hard mucilage water mixed with.

4, this product is a super fine seam gap filling agent, the appropriate gap width of 1 ~ 5 mm, greater than 5 mm gap, need standard type seam caulking agent of the company.

5, large area construction of expansion joint, construction maintenance for the first time, 24 hours after 48 hours after curing for the second time.

6, no glazed brick, archaize brick and porous brick surface suggest using special jointing tool jointing construction, avoid brick surface contamination.

7, when using the eyes, rinse immediately with water and see the doctor in time.

Shelf life:

Implementation standard ：JC/T1004-2006 "Caulking agent for ceramic wall and floor tiles" standard.

In the dry environment and the shade can be stored for at least 18 months.